Mag Box Help Tutorials : How to downgrade your firmware in a MAG 322 IPTV box
Mag Box Help Tutorials : How to unblock your MAG 322 via a firmware downgrade
If you have done a firmware upgrade on your MAG 322 IPTV box, you may have found your IPTV Portal has been blocked.
This is because the new latest firmware allows Infomir to block portal URLs that they have received copyright infringement complaints about.
You may have tried to do a firmware downgrade on the MAG322 yourself, but have get stuck with the error message “Unsupported Architecture”. This is because the latest MAG322 firmware is blocking the firmware downgrade.
But there is a way to downgrade the firmware on the MAG322.
Unplug your MAG322 IPTV box from the power
Press and hold the small reset button on the back of the MAG322 IPTV box
Wait until the white light on the front of the MAG322 IPTV box starts to flash fast
You can then release the small reset button.
The MAG322 IPTV box will now start to boot up.
Press and hold the MENU button on your MAG322 remote control
The “blue” BIOS screen will then appear.
You then navigate to the Upgrade Tools and Press OK
Then Press OK again to enter the Upgrade Software option
Then insert your USB Drive with your MAG322 firmware
Press OK to enter the Using USB” option
The firmware will load into your MAG322 box
The Mag 322 IPTV box will then reboot, and you will have downgraded your MAG 322 firmware.
Video of this process:
Subscribe to our Youtube channel so you never miss any new videos.
Note : users do this process at their own risk. We are not responsible for any issues a factory reset may cause to your box.